● High performance dual-core ceramic heater.
● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using
● Exchangeable 900M series to save use-cost.
Specifications:Package list:Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)Main Unit: 1 UnitInner box: 31.5x27x15.2(cm)
Power:60WHandle set : 1 PCSN.W.: 2.09kg
Heater voltage:26VACIron stand: 1 PCSG.W.: 2.32kg
Temperature range:150~450°CAC cord: 1 PCSCarton: 6 PCS/Carton
Temperature offset range:±50°CManual: 1 CopySize: 55.5x33x48(cm)
Temperature stability:±2°C (in still air, no load)Cleaning sponge: 1 PCSN.W: 14.4kg
Temperature adjustment:5 digits (Default)/1 digit (Fine-tuning)G.W: 15.4kg
Automatic stand-by time:1-120 minutes (Adjustable)
Automatic shutdown time:1-120 minutes (Adjustable)
Heater:60W High performance dual-core ceramic heater
Tip-to-ground impedance:< 2Ω
Tip-to-ground voltage:< 2mV
T900 Series Soldering Tips

ST-60 Soldering Iron

High performance dual-core ceramic heater

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment