• High performance pluggable four-core heating element;
  • Temperature read out in ℃ and ℉
  • On/Off switch on the right side of the unit.
  • MCU controlled temperature calibration.
  • Simulate bar indicating heating up status.
  • LCD display screen making control visualization.
  • User-friendly menu enables system setting easier.
  • Separate iron stand to save room and to make easier deposit.
  • Buttons(1,2,3) for pre-setting or switching frequently used temperature.
  • Low-voltage heater separated from power supply to keep soldering work safer.
  • Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.
Specifications:Packing list:Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)Main Unit: 1 UnitInner box: 25x21x13.4(cm)
Power:80WHandle set : 1 PCSN.W.: 1.74kg
Heater Voltage:26VACIron stand: 1 PCSG.W.: 2.0kg
Temperature range:150~480°CAC cord: 1 PCSCarton: 12 PCS/Carton
Temperature offset range:±50°CManual: 1 CopySize: 51.5x44x43(cm)
Temperature stability:±2°C (in still air, no load)Cleaning sponge: 1 PCSN.W.: 24.0kg
Setting method:adjust by buttonsG.W.: 25.1kg
Temperature calibration:digital
Heater:80W High quality pluggable four-core heating element
Tip-to-ground impedance:< 2Ω
Tip-to-ground voltage:< 2mV
T900 Series Soldering Tips

AT980E Soldering Iron

High quality pluggable four-core heating element

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment