• Smart recognition of working or non-working status
  • Automatic standby, shutdown with smart time setting
  • High frequency eddy heating element, fast heating-up, thermal recovery and high thermal capacity.
  • Temperature locking.
  • Beep alarm function available.
  • Temperature read out in ℃ and ℉
  • MCU controlled temperature calibration.
  • Simulate bar indicating heating up status.
  • User-friendly menu enables system setting easier.
  • Separate iron stand to save room and to make easier deposit.
  • New design with LCD display screen making control visualization.
  • Buttons (1, 2, and 3) for pre-setting or switching frequently used temperature.
  • Temperature up to 500℃ for high thermal capacity required circumstances.
  • Low-voltage heater separated from power supply to keep soldering work safer.
  • Soldering tip designed separate from heater and using exchangeable AT500 series to save use-cost.
Specifications:Packing list:Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional)Main Unit: 1 UnitInner box: 25.5x21x13.5(cm)
Power:150WHandle set : 1 PCSN.W.: 1.7kg
Heater Voltage:28VACIron stand: 1 PCSG.W: 1.95kg
Temperature range:150~500°CAC cord: 1 PCSCarton: 8 PCS/Carton
Temperature offset range:±50°CManual: 1 CopySize: 53x43x28.2(cm)
Temperature stability:±2°C (in still air, no load)Cleaning sponge: 1 PCSN.W.: 15.6kg
Standby time:10 mins(for standby function activated and the duration is fixed)G.W: 1.67kg
Setting method:adjust by buttons
Temperature calibration:digital
Heater:150W High frequency eddy current heating element
Tip-to-ground impedance:< 2Ω
Tip-to-ground voltage:< 2mV

Leave a Reply

Your email address will not be published. Required fields are marked *

Post comment